STEP 1
Design
your
system
MAP YOUR SYSTEM
Make a sketch of your yard.
Identify where you have access to power and water. This is where you will install the control panel.
STEP 2
how many
nozzles do
you need?
NOZZLE PLACEMENT
Place nozzles every 8-10 feet around the perimeter of your yard.
- For nozzles on your fence, use slimline tee nozzles.
- For nozzles on the eaves of your house, use 4
- For nozzles that will be above hard surfaces such as a deck or concrete, use Hago tee nozzles to prevent drip stains.
Indicate where your line will end.
If you want coverage in flowerbeds, mark the location for riser nozzles.
STEP 1
Design your system
MARK FOR NOZZLE PLACEMENTS
Mark nozzle placements every 8-10 feet around the perimeter of your yard.
- For nozzles that will be above hard surfaces such as a deck or concrete, use Hago tee nozzles to prevent drip stains.
Indicate where your line will end.
If you are want coverage in flowerbeds, mark the location for riser nozzles.
ADD UP THE FITTINGS
If you are using risers, use a union tee to split off from the main line. This line will run underground and connect to the riser in the flowerbed.
Along the fence, use tee nozzles.
At the end of the run, use an elbow nozzle.
